Pulveriser with Rotor Classifier
Pulveriser is a high-speed swing beater-type grinding mill. Pulverization is achieved by the impact of the beater on the material in the Grinding Chamber. The built-in classifier ensures precise mesh control and recirculation of oversized particles. The fine powder is swept by the suction of the blower from the grinding chamber.
This High-performance impact grinding system is for the generation of fine powder useful for various industrial applications of minerals such as Calcite, Dolomite, Pyrophyllite, Red Oxide, Bauxite, Petcock, Barite, and Lime Stone.
Engineered Performance Overview
| PULVERISER WITH CLASSIFIER | ||||||
|---|---|---|---|---|---|---|
| MACHINE SIZE |
DIMENSIONS IN MTR. | FEED SIZE |
MESH | PRODUCTION KG/HR. |
POWER(HP) | KWH UNIT |
| P-3” STANDARD | 3 × 2.7 × 4.9 | < 20 mm | 300 | 400 | 50 | 50 |
| P-3.2” Roto Chamber | 3 × 2.7 × 4.9 | < 20 mm | 400 | 400 | 60 | 60 |
| P-3.2” with RAV II Classifier | 3 × 2.7 × 4.9 | < 20 mm | 500 | 450 | 40+15+10 | 70 |
| P-4.2” Standard | 4.2 × 3.5 × 6.8 | < 20 mm | 500 | 700 | 125 | 110-115 |
| P-4.2” with RAV III Classifier | 4.2 × 3.5 × 6.8 | < 20 mm | 500 | 900 | 100+25+15+2+1+1 | 90-95 |
| P-5.2” Standard | 4.5 × 5 × 10 | < 20 mm | 500 | 1500 | 250 | 170-180 |
| P-5.2” with RAV IV Classifier | 8 × 5.5 × 8 | < 20 mm | 500 | 1500 | 180+50+30 | 165-175 |
| P-5.2” with RTD Classifier | 4.5 × 5 × 10 | < 20 mm | 500 | 1500 | 180+50+30 | 165-175 |
| P-4.2" Metal (dross-AL/CU/Zinc 2mm) | 4.2 × 3.5 × 6.8 | < 20 mm | - | 1000-feed | 100 | 90-95 |
| P-3.2" Metal (dross-AL/CU/Zinc 2mm) | 3 × 2.7 × 4.9 | - | - | 500-feed | 50 | 40-45 |
Note – 1% retention on mesh. * Power Consumption and Production output may vary by ±10%, depending on the hardness, grindability, and behaviour of the mineral.
M.O.C. in the main body of the Pulveriser, such as Base plate, grinding chamber, and the blower is made of cast iron. The circumference of the grinding chambers, which comes in contact with the material, is lined with Manganese Steel replaceable liners to ensure a long life of the machine and to protect it from wear & tear.
P32
P42
P52
